fiber orientation

The influence of MMT naonomaterials on the thermal shrinkage performance of PET fiber was investigated by means of WAXD, DSC, fiber orientation measurement, etc.

利用WAXD、DSC和声速法等手段测试纤维的取向、结晶度及结晶形态等的变化，研究蒙脱土的加入对PET纤维热收缩性能的影响。

互联网摘选

Attention was paid on how to lower the production costs in the processing of thermosetting plastics, which covered the fiber orientation, removal of burr and sprue runner material loss.

由于纤维取向、去除飞边和流道料损失等是热固性塑料加工中影响成本的主要问题，故着重介绍了降低上述费用的办法。

互联网摘选

We found that PCS fiber had not apparent crystallization and orientation.

通过分析，PCS纤维没有明显的取向与结晶，呈无定型状态。

互联网摘选

The experimental results show that the crystalline size and orientation indices of the fiber are intimately related to the specific surface area, adsorption properties and mechanical properties of BCF in the thermal oxidative stabilization process.

研究结果表明：聚丙烯腈基热氧稳定化纤维晶区尺寸、取向指数等结构参数与BCF比表面积、吸附特性及力学性能的优劣具有直接内在联系。

互联网摘选

The increase of draw ratios in three-stage drawing process decrease the linear density of PAN fiber and improve the strength, sonic orientation and tensile modulus.

三级拉伸工艺中各拉伸比的提高均有利于PAN纤维线密度的减小及其强度、声速取向度和抗张模量的提高；

互联网摘选

Study of fiber orientation in photopolymer resin under the electric field

电场效应与光敏树脂中纤维取向的研究

互联网摘选

Establishment Method of the Finite Element Model Considering Actual Fiber Orientation and Ply Splice

考虑纤维实际取向和铺层拼接问题的有限元模型建立方法

互联网摘选

Orientation Degree of Graphite Crystallite in PAN-based Carbon Fiber and Its Relation to Tension Modulus

PAN基炭纤维中石墨微晶的取向度及其与抗拉模量的关系

互联网摘选

Influence of Fiber Orientation on Sliding Tribology Behavior of C/ C Composite

纤维取向对C/C复合材料滑动摩擦磨损特性的影响

互联网摘选

Analysis of the Fiber Orientation of Paper hy Microwave Testing

纸张纤维取向的微波测试分析

互联网摘选

The effects of the fiber orientation, fiber volume fraction and strain rate on the overall shear elastic viscoplastic behaviour of unidirectional B/ Al composite are investigated.

详细考察了纤维取向、纤维体积含量及应变率对单向上B／Al复合材料总体剪切弹粘塑性行为的影响。

互联网摘选

Normally, the paper fiber orientation and the direction of the opening is the ideal vertically.

一般的情况, 纸张的纤维方向与开口处的方向垂直是最理想的.

互联网摘选